Power Flushing will flush your central heating system using a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is inside your central heating system.
The process that we usually carry out does not use the “traditional” method of power flushing a central heating system, which can cause old pipes to leak due to high pressure being pumped into the central heating system.
As a proud accredited company for Adey Magnaclense, we can offer a one-off cleanse, using the most up-to-date technology to ensure your radiators heat up properly. This process helps to increase the life-expectancy of the whole of your central heating system, keeps your heating bills low and reduces the risk of breakdowns.
Central heating power flushing helps deal with heating problems that you cannot always see, and creates a more efficient heating system.
Sludge, rust and limescale causes leaks and blocked pipes. Dirty water in your pipes causes heating problems and reduces efficiency.
Sludge build-up causes cold spots in your radiators. This means they have to work harder to heat a room and you waste more energy.
A clogged boiler and pump causes breakdowns. 87% of boiler breakdowns are due to dirty water in your central heating system.
What benefits do you gain from having central heating power flushing?
The sludge in your radiators creates cold spots so the heat cannot flow around them efficiently.
We’ll use a machine and 3-Step chemical process to thoroughly clear out your boiler, pipes and radiators, and replace dirty sludge with clean water.
After the Power Flushing has removed sludge from your pipes, radiators and boiler, your system will work much better.
When boilers and heating systems are power flushed, they are restored to their usual level of efficiency. If your system has become clogged up with sludge and dirt over a period of time, it cannot perform to its maximum potential to heat your home. A heating system clean provides your home with many benefits and savings.
After your heating system has had power flushing, it’s essential that it stays like this to avoid additional expenses in the future. Inhibitors are added as part of every flush, but can overtime dilute as a result of small leaks or refilling radiators.
To decide whether power flushing is the right decision for you, our professional heating engineers are happy to talk through the process with you, take a look at the system and suggest the best course of action.
Book a Power Flush TODAY. Call Us on 020 3137 3333
A by-product of the chemical reaction between metals and liquids is sludge. As this deposit builds up in the bottom of radiators, as the water flows around it, it slowly causes cold spots on radiators and blocks piping.
By restricting the flow of circulating water, this puts your heater’s boiler and pump under stress. Because of this, it’s less effective, less efficient, and it won’t last as long.
By having central heating power flushing you can clear the sludge built up in your system over time.
If the above sounds like the type of company that you would like to have working in your home in Saint Albans, please don’t hesitate to get on contact today! Call 0203 137 3333 or just fill in the form below and we will contact you to discuss your needs!
Avenue Heating will power flush your heating system using a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is within your heating system.
The type of process that we usually carry out doesn’t use the “traditional” method of power flushing a heating system, which can cause old pipes to leak due to high pressure being pumped into the system.
As a proud accredited company for Adey Magnaclense, we can offer a one-off cleanse, using the most up-to-date technology to ensure your radiators heat up correctly. This process helps to increase the life-expectancy of the entire system, keeps your heating bills down and reduces the risk of breakdowns.
There will be a number of signs that you need power flushing, below is a list of the most typical signs that you will need to have your central heating system flushed:
It is recommended that you should have your heating system flushed every 4-5 years. When you have a new boiler installed, depending on the water quality of your system, it may be necessary to carry out a full flush at that point.
The time it takes to flush a system depends largely on the size of the property and how blocked or dirty the system is. The larger the system and the more sludge there is, the longer it will take. We take pride in the quality of our work and will flush your system for as long is required to clean the system and will work on each individual radiator to specifically ensure each one is clear of blockages.
To give an indication, a property with a system consisting of fifteen radiators will take a whole day to complete.
It is advised that your flush is carried out by a qualified professional. All of our engineers are fully qualified and take part in ongoing manufacturer training to ensure that their skills and knowledge are always up to highest of standards.
The cost of a flush of your heating system varies and is individually quoted to reflect your home’s unique system composition.
To get a no obligation quote for the cost of flushing your heating system, call us today on 0203 137 3333 or just click below and we will contact you to discuss your requirements!
St Albans is a cathedral city in Hertfordshire, England located at the east of Hemel Hempstead and west of Hatfield, 20 miles (32 km) north-west of London. St. Albans, which later became the Roman city of Verulamium, was the first significant settlement for travelers traveling north on the ancient Roman Watling Street. It is located in the Greater London Built-up Area and the commuter belt of London.
St Albans‘ numerous historic inns can be attributed to its past as a small rural market town, a Christian pilgrimage place, and the first coaching stop on the route to and from London. Small and lacking in industry, St. Albans was in the Victorian era.
Our normal operating hours are:
Monday- Friday 7am – 6pm
Emergency out of hours include:
Monday – Friday 7pm – 12pm
Saturday & Sunday 7am – 10pm
