Power Flushing flushes your central heating system with a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is laying your central heating system.
The process that we mainly carry out doesn’t use the “traditional” method of power flushing a central heating system, which can cause old pipes to leak because of high pressure being pumped into the central heating system.
As a proud accredited company for Adey Magnaclense, we can offer a one-off cleanse, using the most up-to-date technology to make sure your radiators heat up properly. This process helps to improve the life-expectancy of the whole of your central heating system, keeps your heating bills down and reduces the risk of breakdowns.
Central heating power flushing helps deal with heating problems that you cannot always see, and creates a more efficient heating system.
Sludge, rust and limescale causes leaks and blocked pipes. Dirty water in your pipes causes heating problems and reduces efficiency.
Cold spots in your radiator are caused by sludge build-up. As a result, it takes them longer to heat a room and you waste more energy..
A clogged boiler and pump causes breakdowns. 87% of boiler breakdowns are due to dirty water in your central heating system.
What benefits do you gain from having central heating power flushing?
The sludge in your radiators creates cold spots so the heat cannot flow around them efficiently.
We will use a machine and 3-Step chemical process to thoroughly clear out your boiler, pipes and radiators, and remove all of the dirty sludge and replace with fresh clean water.
Once the Power Flushing has removed sludge from your pipes, radiators and boiler, your system will work much better.
When a central heating system and boiler has been power flushed, they are restored to their usual level of efficiency. If your system has become clogged up with sludge and dirt over time, it can’t perform to its maximum potential to heat your home. A heating system clean provides your home with many benefits and savings.
After your heating system has had power flushing, it’s essential that it remains like this to avoid more expenses in the future. Inhibitors are added as part of every flush, but can overtime dilute as a result of small leaks or refilling radiators.
To decide whether power flushing is the right decision for you, our engineers are happy to talk through the process with you, look at the system and suggest the best solution.
Book a Power Flush TODAY. Call Us on 020 3137 3333
A by-product of the chemical reaction between metals and liquids is sludge. As this deposit builds up in the bottom of radiators, as the water flows around it, it slowly causes cold spots on radiators and blocks piping.
Your heater’s boiler and pump are put under stress when this occurs by restricting the flow of circulating water. As a result, it is less effective, less efficient, and will not last as long.
By having central heating power flushing you can clear the sludge built up in your system over time.
If Avenue Heating sounds like the kind of company that you would like to have working in your home in Long Marston, please don’t hesitate to get on contact today! Call 0203 137 3333 or just fill in the form below and we will contact you to discuss your requirements!
We will power flush your heating system using a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is built up in your heating system.
The type of process that we will carry out does not use the “traditional” method of power flushing a heating system, which can cause old pipes to leak due to high pressure being pumped into the system.
As a proud accredited company for Adey Magnaclense, we can offer a one-off cleanse, using the most modern technology to make sure your radiators heat up properly. This process helps to increase the longevity of the entire system, keeps your heating bills down and reduces the risk of breakdowns.
There will be a number of signs that you need power flushing, below is a list of the most common signs that you possibly need to have your central heating system flushed:
It is recommended that you should have your heating system flushed every 4-5 years. When you have a new boiler installed, depending on the water quality of your system, it may be necessary to carry out a full flush at that point.
The time it takes to flush a system depends largely on the size of the property and how blocked or dirty the system is. The larger the system and the more sludge there is, the longer it will take. We take pride in the quality of our work and will flush your system for as long is required to clean the system and will work on each individual radiator to specifically ensure each one is clear of blockages.
To give an indication, a property with a system consisting of fifteen radiators will take a whole day to complete.
It is advised that your flush is carried out by a qualified professional. All of our engineers are fully qualified and take part in ongoing manufacturer training to ensure that their skills and knowledge are always up to highest of standards.
The cost of a flush of your heating system varies and is individually quoted to reflect your home’s unique system composition.
To get a no obligation quote for the cost of flushing your heating system, call us today on 0203 137 3333 or just click below and we will contact you to discuss your requirements!
Our normal operating hours are:
Monday- Friday 7am – 6pm
Emergency out of hours include:
Monday – Friday 7pm – 12pm
Saturday & Sunday 7am – 10pm
