Power Flushing will flush your central heating system using a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is lodged your central heating system.
The process that we normally carry out doesn’t use the “traditional” method of power flushing a central heating system, which can cause old pipes to leak because of high pressure being pumped into the central heating system.
As a proud accredited company for Adey Magnaclense, we are able to offer a one-off cleanse, using the most up-to-date technology to make sure your radiators heat up correctly. This process helps to improve the life-expectancy of the whole of your central heating system, keeps your heating bills down and reduces the risk of breakdowns.
Central heating power flushing can resolve any heating issues you cannot see, and creates a more efficient heating system.
Limescale, sludge, and rust cause leaks and blocked pipes. Dirty water in your pipes reduces the efficiency of your heating system..
Cold spots in your radiator are caused by sludge build-up. As a result, it takes them longer to heat a room and you waste more energy..
Clogged boilers and pumps cause breakdowns. A dirty water system is at the root of 87% of boiler breakdowns..
What are the benefits to having a central heating power flush?
The sludge in your radiators creates cold spots so the heat can’t flow around them efficiently.
We’ll use a machine and three-step chemical process to fully clean out your boiler, pipes and radiators, and replace dirty sludge with clean water.
Once the Power Flushing has removed sludge from your pipes, radiators and boiler, your system will work much better.
When a central heating system and boiler has been power flushed, they are restored to their usual level of efficiency. If your system has become clogged up with sludge and dirt over time, it cannot perform to its maximum potential to heat your home. A heating system clean provides your home with many benefits and savings.
After your heating system has had power flushing, it’s essential that it stays like this to avoid additional expenses in the future. Inhibitors are added as part of every flush, but can overtime dilute as a result of small leaks or refilling radiators.
To determine whether power flushing is the right decision for you, our professional heating engineers are happy to chat about the process with you, look at the system and suggest the best way forward.
Book a Power Flush TODAY. Call Us on 020 3137 3333
Chemical reactions between metals and liquids produce sludge as a by-product. These deposits accumulate in the bottom of radiators, causing cold spots on radiators and blocking piping as the water flows around them.
Your heater’s boiler and pump are put under stress when this occurs by restricting the flow of circulating water. As a result, it is less effective, less efficient, and will not last as long.
By having central heating power flushing you can clear the sludge built up in your system over time.
If the above sounds like the type of company that you would like to have working in your home in Leverstock Green, please don’t hesitate to get on contact today! Call 0203 137 3333 or just fill in the form below and we will contact you to discuss your options!
Avenue Heating will power flush your heating system using a three-pronged process of combining the use of chemicals, heat and agitation to dislodge, move and extract out the sludge and dirty water that is built up in your heating system.
The type of process that we usually carry out doesn’t use the “traditional” method of power flushing a heating system, which can cause old pipes to leak because of high pressure being pumped into the system.
As a proud accredited company for Adey Magnaclense, we can offer a once only cleanse, using the most up-to-date technology to make sure your radiators heat up properly. This process helps to increase the longevity of the entire system, keeps your heating bills lower and reduces the risk of breakdowns.
There will be a number of signs that you need power flushing, below is a list of the most typical signs that you possibly need to have your central heating system flushed:
It is recommended that you should have your heating system flushed every 4-5 years. When you have a new boiler installed, depending on the water quality of your system, it may be necessary to carry out a full flush at that point.
The time it takes to flush a system depends largely on the size of the property and how blocked or dirty the system is. The larger the system and the more sludge there is, the longer it will take. We take pride in the quality of our work and will flush your system for as long is required to clean the system and will work on each individual radiator to specifically ensure each one is clear of blockages.
To give an indication, a property with a system consisting of fifteen radiators will take a whole day to complete.
It is advised that your flush is carried out by a qualified professional. All of our engineers are fully qualified and take part in ongoing manufacturer training to ensure that their skills and knowledge are always up to highest of standards.
The cost of a flush of your heating system varies and is individually quoted to reflect your home’s unique system composition.
To get a no obligation quote for the cost of flushing your heating system, call us today on 0203 137 3333 or just click below and we will contact you to discuss your requirements!
Our normal operating hours are:
Monday- Friday 7am – 6pm
Emergency out of hours include:
Monday – Friday 7pm – 12pm
Saturday & Sunday 7am – 10pm
